Diamond Drop Earrings

These earrings have a lovely mixture of textures - hammertone links, diamond bead frames, and the beaded diamond earring posts. I hope you like the result as much as I do! These earrings are super easy to make - wire wrap the beaded drop at the bottom, and connect the pieces with jumprings. To review wire wrapping, follow the link below:

Basic Wire Wrapping

Parts Needed:

Swarovski® 8mm Round Beads
TierraCast® 8mm Diamond Bead Frames in
Antique Silver or Antique Gold or Antique Copper
TierraCast® Hammertone Rectangle Links in
Antique Silver, Antique Gold or Antique Copper
TierraCast® Diamond Earrong Posts in
Antique Silver, Antique Gold or Antique Copper
2" Headpins
Silver, Gold or Copper
Round Jump Rings in
Silver, Gold or Copper
OR

How to Make:

Make a wire-wrapped drop with a 2" headpin, an 8mm Swarovski bead, and an 8mm Diamond Bead Frame.
Use a jumpring to connect the wire wrapped drop to the hammertone rectangle.
Use a jumpring to connect the hammertone rectangle to the diamond earring post.

Our earring kits include all the parts needed to make one pair of earrings, and you choose the crystal color.

Kit includes:

(2) Swarovski® 8mm Faceted Round Beads
(2) TierraCast® Diamond Earring Posts
(2) TierraCast® Hammertone Rectangle Links
(2) TierraCast® 8mm Diamond Bead Frames
(4) Jumprings

You'll need a pair of wire cutters, round nose pliers and bent nose pliers to complete these earrings. You can purchase all of these tools here if you don't already own them.

THIS KIT DOES NOT INCLUDE PRINTED INSTRUCTIONS. You'll need to refer to our website project page for the instructions.

KT39-S Silver Diamond Earrings Kit $8.95

KT39-G Gold Diamond Earrings Kit $8.95

KT39-C Copper Diamond Earrings Kit $8.95

The jewelry you make from this design is yours do with as you please. You may make it as often as you like without any restrictions. For example, you can make this jewelry for yourself, for friends, or to sell. I do not require that you give credit to me for the design.

While I assert no rights over the finished jewelry, the photography/images and text on this page are copyrighted as follows:

Copyright Erin Weik. Licensed under the Creative Commons License Attribution-No Derivs version 2.5. You are free to copy, distribute and display this work for commercial and non-commercial use. You must attribute this work to Erin Weik and www.123bead.com. You may not alter, transform, or build upon this work. For any reuse or distribution, you must make clear to others the license terms of this work. Any of these conditions can be waived if you get permission from the copyright holder. For the long version of this license, please see:
http://creativecommons.org/licenses/by-nd/2.5/

This copyright applies only to the document above, and does not apply to the rest of the website content, images and text, for which I retain full rights.